GM-2000 plasma treatment machine is consist of plasma generator and one direct injection plasma nozzle. Plasma nozzle with three different size: 3-5 mm, 7-13 mm, 15-18 mm. We can also customize other types of nozzle for meet customer different needs. The plasma surface treatment machine of GM-2000 with panel power adjustment which is very convenient and quick.
There are many applications of plasma in LCD screens, such as UV coating, ACF dispensing, plasma surface cleaning and activation before lamination of polarizers, anti-fingerprint films, etc. In order to prevent the occurrence of air bubbles during lamination and the phenomenon that the lamination is not firm, a plasma processor is often required for surface cleaning and activation. The terminals of the liquid crystal screen are made more hydrophilic, which facilitates the subsequent bonding process.
After the terminals are wiped with alcohol, they undergo plasma treatment and then enter the next process of ACF pre-pressing and initial pressing, and finally the FPC circuit board is bonded. After the test, the product inspection is qualified.
Low temperature plasma treatment machine will not damage the surface of the product, it can be started and stopped at any time, and the production efficiency is high. After plasma treatment, the dyne value can reach 60 dyne, and the water drop angle also can less than 10 degree.
Welcome to send inquiry about plasma treat the LCD terminals.
